Dji fpv combo3/22/2023 ![]() The microSD card slot and USB-C port are on the left side.On the right side of the goggles you will find a Link button, Power Port, and Audio Port.Toggle right to shift menu options right, toggle left to shift menu options left. Toggle up to go back, and toggle down to move to the next option. Toggle the 5D button to scroll through the menu and press to confirm a selection. On the upper right side of the goggles you will find the Shutter/Record button, Back button, and 5D button.Ensure the antennas are properly tightened before flying. The front of the DJI FPV Goggles V2 has four replaceable antennas to ensure optimum signal receiving and communication.Insert the battery into the battery compartment. Make sure it is secured in place.TIP: Attach the propellers with red rings in the centre to the motors with red rings, and attach the ones without red rings to the corresponding motors. Align the propeller on the motor, then press down and rotate to secure them. Ensure the propellers are properly attached.RockSteady stabilisation is only available for recorded footage, but not for the live view of the goggles. TIP: A microSD card is required to save videos in high definition. ![]() Open the microSD card cover and insert a microSD card.To find out more about the DJI Motion Controller, which can be used to control the drone with your hand movements, read our Guide To The Motion Controller. Want to know more about the DJI FPV drone? Then read our hands-on review. This tutorial blog will teach you about setting up the FPV drone, goggles, and remote controller, and how to work the basic operating functions to get you in the air quickly and safely. The DJI FPV Drone Combo provides a high-octane and immersive flight experience.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |